263 with 172 posters participating, including story author
With the name Smarter, you might expect a network-connected kitchen appliance maker to be, well, smarter than companies selling conventional appliances. But in the case of the Smarters Internet-of-things coffee maker, youd be wrong.
As a thought experiment, Martin Hron, a researcher at security company Avast, reverse engineered one of the $250 devices to see what kinds of hacks he could do. After just a week of effort, the unqualified answer was: quite a lot. Specifically, he could trigger the coffee maker to turn on the burner, dispense water, spin the bean grinder, and display a ransom message, all while beeping repeatedly. Oh, and by the way, the only way to stop the chaos was to unplug the power cord. Like this:
What a hacked coffee maker looks like
Its possible, Hron said in an interview. It was done to point out that this did happen and could happen to other IoT devices. This is a good example of an out-of-the-box problem. You don’t have to configure anything. Usually, the vendors dont think about this.
What do you mean out-of-the-box?
Enlarge/ This poor IoT coffee maker didn’t stand a chance.
When Hron first plugged in his Smarter coffee maker, he discovered that it immediately acted as a Wi-Fi access point that used an unsecured connection to communicate with a smartphone app. The app, in turn, is used to configure the device and, should the user choose, connect it to a home Wi-Fi network. With no encryption, the researcher had no problem learning how the phone controlled the coffee maker and, since there was no authentication either, how a rogue phone app might do the same thing.
That capability still left Hron with only a small menu of commands, none of them especially harmful. So he then examined the mechanism the coffee maker used to receive firmware updates. It turned out they were received from the phone withyou guessed itno encryption, no authentication, and no code signing.
These glaring omissions created just the opportunity Hron needed. Since the latest firmware version was stored inside the Android app, he could pull it onto a computer and reverse engineer it using IDA, a software analyzer, debugger, and disassembler thats one of a reverse engineers best friends. Almost immediately, he found human-readable strings.
From this, we could deduce there is no encryption, and the firmware is probably a plaintext image that is uploaded directly into the FLASH memory of the coffee maker, he wrote in this detailed blog outlining the hack.
Taking the insides out
To actually disassemble the firmwarethat is, to transform the binary code into the underlying assembly language that communicates with the hardware, Hron had to know what CPU the coffee maker used. That required him to take apart the device internals, find the circuit board, and identify the chips. The two images below show what he found:
Enlarge/ The circuit board.
Enlarge/ 1 ESP8266 with AT modem firmware, 2 STM32F05106 ARM Cortex M0 main CPU that glues everything together, 3 I2C EEPROM with configuration, 4 debug ports and programming interface.
With the ability to disassemble the firmware, the pieces started to come together. Hron was able to reverse the most important functions, including the ones that check if a carafe is on the burner, cause the device to beep, andmost importantlyinstall an update. Below is a block diagram of the coffee makers main components:
Hron eventually acquired enough information to write a python script that mimicked the update process. Using a slightly modified version of the firmware, he discovered it worked. This was his hello world of sorts:
Freak out any user
The next step was to create modified firmware that did something less innocuous.
Originally, we wanted to prove the fact that this device could mine cryptocurrency, Hron wrote. Considering the CPU and architecture, it is certainly doable, but at a speed of 8MHz, it doesnt make any sense as the produced value of such a miner would be negligible.
So the researcher settled on something elsea machine that would exact a ransom if the owner wanted it to stop spectacularly malfunctioning the way shown in the video. With the benefit of some unused memory space in the silicon, Hron added lines of code that caused all the commotion.
We thought this would be enough to freak any user out and make it a very stressful experience. The only thing the user can do at that point is unplug the coffee maker from the power socket.
Once the working update script and modified firmware is written and loaded onto an Android phone (iOS would be much harder, if not prohibitively so because of its closed nature), there are several ways to carry out the attack. The easiest is to find a vulnerable coffee maker within Wi-Fi range. In the event the device hasnt been configured to connect to a Wi-Fi network, this is as simple as looking for the SSID thats broadcast by the coffee maker.
Once the device connects to a home network, this ad hoc SSID required to configure the coffee maker and initiate any updates is no longer available. The most straightforward way to work around this limitation would be if the attacker knew a coffee maker was in use on a given network. The attacker would then send the network a deauthorization packet that would cause the coffee maker to disconnect. As soon as that happens, the device will begin broadcasting the ad hoc SSID again, leaving the attacker free to update the device with malicious firmware.
A more opportunistic variation of this vector would be to send a deauthorization packet to every SSID within Wi-Fi range and wait to see if any ad hoc broadcasts appear (SSIDs are always Smarter Coffee:xx, where xx is the same as the lowest byte of the devices MAC address).
The limitation of this attack, it will be obvious to many, is that it works only when the attacker can locate a vulnerable coffee maker and is within Wi-Fi range of it. Hron said a way around this is to hack a Wi-Fi router and use that as a beachhead to attack the coffee maker. This attack can be done remotely, but if an attacker has already compromised the router, the network owner has worse things to worry about than a malfunctioning coffee maker.
In any event, Hron said the ransom attack is just the beginning of what an attacker could do. With more work, he believes, an attacker could program a coffee makerand possibly other appliances made by Smarterto attack the router, computers, or other devices connected to the same network. And the attacker could probably do it with no overt sign anything was amiss.
Putting it in perspective
Because of the limitations, this hack isnt something that represents a real or immediate threat, although for some people (myself included), its enough to steer me away from Smarter products, at least as long as current models (the one Hron used is older) dont use encryption, authentication, or code signing. Company representatives didnt immediately respond to messages asking.
Rather, as noted at the top of this post, the hack is a thought experiment designed to explore whats possible in a world where coffee machines, refrigerators, and all other manner of home devices all connect to the Internet. One of the interesting things about the coffee machine hacked here is that its no longer eligible to receive firmware updates, so theres nothing owners can do to fix the weaknesses Hron found.
Hron also raises this important point:
Additionally, this case also demonstrates one of the most concerning issues with modern IoT devices: The lifespan of a typical fridge is 17 years, how long do you think vendors will support software for its smart functionality? Sure, you can still use it even if its not getting updates anymore, but with the pace of IoT explosion and bad attitude to support, we are creating an army of abandoned vulnerable devices that can be misused for nefarious purposes such as network breaches, data leaks, ransomware attack and DDoS.
Theres also the problem of knowing what to do about the IoT explosion. Assuming you get an IoT gadget at all, its tempting to think that the, uh, smarter move is to simply not connect the device to the Internet at all and allow it to operate as a normal, non-networked appliance.
But in the case of the coffee maker here, that would actually make you more vulnerable, since it would just broadcast the ad hoc SSID and, in so doing, save a hacker a few steps. Short of using an old-fashioned coffee maker, the better path would be to connect the device to a virtual LAN, which nowadays usually involves using a separate SSID thats partitioned and isolated in a computer network at the data link layer (OSI layer 2).
Hrons write-up linked above provides more than 4,000 words of rich details, many of which are too technical to be captured here. It should be required reading for anyone building IoT devices.
Listing image by Avast